Home >> Plate Roller >> 3 Roller Bending Machine >> Asymmetrical Plate Bending Machine

Plate Roller

Plate Roller
Asymmetrical Plate Bending Machine

 

Type 

Max. Thickness (mm)

Max. 

Bending width

(mm)

Yield limit

Mpa

Min. Bending diameter

(mm)

Upper roller diameter

(mm)

Down roller

Diameter

(mm)

Side roller diameter

(mm)

Motor power

(KW)

W11F-2x1000

2

1000

245

160

110

110

110

1.5

W11F-3x1200

3

1200

245

180

120

120

120

1.5

W11F-2x2000

2

2000

245

250

130

130

130

2.2

W11F-4x1000

4

1000

245

300

130

130

130

3

W11F-4x1500

4

1500

245

300

135

135

135

3

W11F-4x2000

4

2000

245

350

150

150

150

3

W11F-6x1000

6

1000

245

350

140

140

140

3

W11F-6x1500

6

1500

245

400

150

150

150

4

W11F-6x2000

6

2000

245

400

160

 

160

160

5.5

Asymmetrical Plate Bending Machine

Technical specification

Two rolls powered by a single gearbox and gear system for top and bottom rolls;

asymmetrical plate rolling machine
Asymmetrical3 Roller Bending Machine

Rigid steel frame;

Manual drop end;

Induction hardened rolls;

Digital read out for rear roll optional;

Structure

1.The down rollers is the main drive, do the movement of elevation. Through the meshing of the gear between

3 Roller Bending Machine
Asymmetrical3 Roller Bending Machine

the up and bottom roller to drive the upper roller rotate. The side roller for tilting lifting motion.It’s have double function of pre-bending and circle.Compact structure and easy operation and maintenance.

2.The machine consists of two parts, the operation part and the transmission part which are welded at the whole bottom pallet. The operation part consists of left and right bearing housing, one upper roller, one lower roller and one side roller, lifting gears and some accessories. The lower roller is the main one, upper roller can be adjusted at the height. The transmission part consists with the main motor, speed-reducing motor and other accessories.

3.The lower roller is driven by the main motor through the reducer. The main reductor output shaft transmits to the two lower rollers through a group of gear wheel. Through the meshing with lower roller gear and upper roller gear to drive the upper roller.

4.The down rollers’ elevation come from the handle wheel rotate to drive the cam.

5.The auxiliary engine drive the worm screw, worm wheel,screw nut,screw mandrel to make the side roller do elevation movement.

6.Drop the roller to the appropriate height when unloading.After the machine stopping,take the sliding set from upper roller.Turn the upper roller to certain angle,the rolled metal cylinder can be dropped out from one side of the upper roller.

3 Roller Bending Machine
Asymmetrical3 Roller Bending Machine

Application:

Fuel Tanks, Storage Systems, Shipyards, Water Heaters, Autoclaves, Food Processing Equipment, Coolers, Structural Steel, Filters, Pressure Vessels, Mining Equipment, Mixers, Heat Exchangers, Boilers, Pipelines, Drilling Rigs, Chimney Tubes, Air Compressors, Wind Towers, Nuclear Reactors and that's just some!

Asymmetrical Plate Bending Machine
Asymmetrical Plate Bending Machine

Features:

The structure of the machine is symmtrical 3-roll, two lower rolls are symmetrical central location, so it is convenient for machine vertical movement.

The machine is started bu manually under pressure, and then the two rollers rotates through the output gear reducer with roller gear meshing.

The machine is cheaper than the traditional one, and the structure is simple and easy for operation.

The machine is cost-effective, and has long performance life.

Only one operator is required.

For High Productivity

plate roller
Asymmetrical Plate Bending Machine

For the possibility to bend conical plates.

Because it is very user friendly.

Description:

The hydraulic asymmetrical roller bending machine is a kind of hydraulic plate rolling machine in the form of three roller asymmetry. The upper roll is used as the main drive. The lower roll moves vertically to clamp plates tightly. It has dual function of pre-bending and rolling. The machine uses the hydraulic oil in hydraulic cylinder to make piston rod drive the work rolls do up and down movement. This hydraulic plate rolling machine is designed for rolling light or medium plates. HB manufactures a wide variety of hydraulic asymmetrical roller bending machines that have unique designs and features. Our rolling machines employ the latest technology to handle a broad range of materials without any difficulty. Our hydraulic plate rolling machines are highly demanded by the chemical industry, shipbuilding industry, water treatment plant, power plant, petroleum industry, etc.

plate roller
Asymmetrical Plate Bending Machine