Home >> Plate Roller >> 3 Roller Bending Machine >> Cone Rolling Machine

Cone Bending Machine,Cone Roll Forming Machine

Cone Bending Machine,Cone Roll Forming Machine
Cone Rolling Machine

                Device model

Technical parameters

BIT612

Maximum coil length

1200mm

Large mouth diameter

240mm

Small mouth diameter

30mm

Main motor power

1.5kW*3

Hydraulic motor

3kW

Main Reducer

Cycloid 2#

Notes: It can roll Q235 sheets with a thickness of 6mm, a tapered workpiece with aminimum uper diameter of 90mm, amaximum diameter of 762mm, and a plate length of 1000mm.

Cone Rolling Machine

Special hydraulic three-roller cone rolling machine.

The upper roller moves in a symmetrical position at the center of the two lower rollers. It is obtained by the hydraulic oil in the hydraulic cylinder acting on the piston. It is characterized by safety, stability, and automatic oil return when overloaded, which maximizes the protection of the equipment; The output gear of the reducer meshes with the gear of the lower roller to make a rotary motion, which provides power for the board to travel. Integral structure, simple foundation and easy to move.

Cone Rolling Machine
Cone Rolling Machine

1. Electrical control protection is equipped with depress and lift limit photoelectric switches to protect the equipment from damage due to misoperation.

2. There is a photoelectric limit switch at the limit of the auxiliary bar, and the upper roller will stop automatically when it rises to the position of taking the tube.

3. Integral structure, simple foundation and easy to move.

4. Vibration aging treatment + shot blasting treatment of main structural parts makes the surface of the equipment more exquisite and the structural parts never change shape.

5. The work roll shaft head is mirror-finished to increase strength and improve equipment life.

Cone Roll Forming Machine
Cone Roll Forming Machine