Home >> Plate Roller >> 3 Roller Bending Machine >> W11H three roller rolling machine

Plate roller

Plate roller
W11H three roller rolling machine

Mdel

thickness

Yield 

limit

Min 

diameter with full 

load

Rolling speed

power

diamension

 

(mm)

(MPa)

(m/min)

(Kw)

(m)

W11H-6*2000

4

245

500

5.2

5.5

3.21*1.17*1.31

W11H-4*2500

2

245

500

5.2

5.5

3.17*1.17*1.31

W11H-8*2000

5

245

550

5

5.5

3.21*1.17*1.31

W11H-6*2500

4

245

550

5

5.5

3.71*1.17*1.31

W11H-12*2000

8

245

600

5

5.5

4.15*1.32*1.49

W11H-8*2500

5

245

600

5

5.5

4.65*1.32*1.49

W11H-16*2000

12

245

700

4.5

7.5

3.29*1.62*1.64

W11H-12*2500

8

245

700

4.5

7.5

4.42*1.62*1.64

W11H-8*3200

6

245

700

4.5

7.5

5.12*1.62*1.64

W11H-20*2000

14

245

800

5

18.5

4.38*1.36*1.49

W11H-16*2500

12

245

800

5

18.5

5.58*1.36*1.49

W11H-12*3200

8

245

800

5

18.5

4.13*1.96*1.75

W11H-25*2000

20

245

1100

4

18.5

4.63*1.96*1.75

W11H-20*2500

14

245

1100

4

18.5

5.33*1.96*1.75

W11H-16*3200

12

245

1100

4

18.5

4.63*1.96*1.75

W11H-25*3200

20

245

800

5

18.5

5.33*1.96*1.75

W11H-20*3200

14

245

800

5

18.5

6.13*1.96*1.75

W11H-16*4000

12

245

800

5

18.5

4.60*2.42*2.51

W11H-32*2000

25

245

1300

4

22

5.30*2.42*2.51

W11H-25*3200

20

245

1300

4

22

6.10*2.42*2.51

W11H-20*4000

14

245

1300

4

22

5.7*2.85*2.97

W11H-35*2500

25

245

1500

4

30

6.4*2.9*3

W11H three roller rolling machine

3 roller bending machine
W11H 3 roller rolling machine

W11H three roller rolling machine with steel plate end pre bending function, can be rolled into the round and curved conical workpiece. Roll up and down movement of the machine, the whole horizontal movement of the two lower roller; the three rollers are driven roller. Automatic leveling, by the microcomputer control, digital display. The machine integrating machine, electricity, liquid, and the action between the mutual interlocking protection.

This W11H three roller rolling machine has the functions of absolute leveling, relative leveling, automatic to middle, power off memory, fault self diagnosis and so on.

The W11H three roll plate roller with high precision, complete function, low energy consumption, is the ideal Curve down rolling machine for bending.

1.Technology from Germany. Sweden

2.The upper roller is fixed,two lower rollers do arc down movement around a fixed center of rotation,two bottom rollers can lift alone or in combination.

3.Loading material for one time do not need to make a U-turn to complete pre-bending and adjust circle.

4.Three work rolls are the main drive roller, and ensure that any thickness of material with good feeding coiled.

5.Three rollers are close,able to roll small tube diameter and roundness correction.

Features:

1. Easy to operate, coiling method diversification.

3 roller bending machine
3 roller bending machine
2. The movement is simple (horizontal and vertical movement of the synthesis of movement, arc lifting movement), fault less.

3.Plate rolling process, always in a clamped state from sliding deviation.

4.Three working rollers diameter are the same.

5.The workpiece can be removed under woring rollers loosening clearance at any state no need to vertex position.

3 roller bending machine
W11H three roller rolling machine

6 Microcomputer control, synchronization accuracy is ± 0.2mm.

Characteristic:

  1. The lower roller can move in the horizontal direction.
  2. Rolling Cone cylinder is extremely convenient.
  3. Steel plate end pressure head (pre elbow)

Equipped with a balancing mechanism on the tail of the upper roller, all the movements of the rolling machine are controlled by the electrical centralized control. With a separate console, easy to operate. Roller bearings work roll bearings are used to improve the work efficiency of the machine. The whole machine capacity reduced to energy-saving new products.

The equipment can roll thick 1mm-80mm, board width 8000mm sheet.

Safety and protection:

1. W11H three roll plate roller  shall have reliable safety protection or protective devices and shall comply with the requirements of CJB 17120.

2.When the moving part of the coiler moves to the extreme position, it should generally have safety protection measures or set safety protection devices.

3.When the curve down three roller rolling machine works, it should have reliable interlock protection measures;

4.Bending machines should have reliable overload protection devices.When working at full load, the normal operation of the coiling machine shall be guaranteed.

When a super-load condition occurs, the protection device shall ensure that the important parts such as the rack, work rolls and hydraulic cylinders of the coiling machine are not damaged.

5.Parts that are easily loosened by the coiler should be equipped with anti-loose devices.

6.Except for the movable exposed parts except for the coiling machine working series, they should be painted in accordance with relevant standards.

7.Curve down three roller rolling machine instruction manual shall comply with the provisions of Chapter 19 of GB 17120-1997, shall have safety precautions and related warning content, and shall explain the measures to ensure personal safety in addition to the provisions. 

Main Standard Parts

Title

Positioning

Axletree

ZWZ

Main Electrical Components

Schneider

Hydraulic System

Pump

HCHC

Valve

Yuken

Digital
Display
System

Touch Screen

DELTA

PLC

DELTA

Transducer

OMRON

After-Sale Service

The warranty time for this arc down-adjusting 3-roller rolling equipment in our company is one year.

Within the warranty time, we will reply within 24 hours if there is any big failure.

Our company can provide free service for repair and maintenance for this plate rolling machine during the warranty time.

Our company is responsible for any spare parts needed by customers. The changed parts' warranty will be from the date when they are changed.