Home >> Plate Roller >> 3 Roller Bending Machine >> W11S-10×3000 3 Roller Bending Machine

Plate Roller

Plate Roller
W11S-10×3000 3 Roller Bending Machine

Title Positioning
Axletree ZWZ
Main Electrical Components Schneider
Hydraulic
System
Pump HCHC
Valve Yuken
Digital
Display
System
Touch Screen DELTA
PLC DELTA
Transducer OMRON

W11S-10×3000 3 Roller Bending Machine

Description:

W11S-10×3000 3 Roller Bending Machine can roll plate to cylinder, U-shape and so on. The up roller of this device can do up and down, right and left move.

plate roller
plate roller

The device is hydraulic 3-roller rolling machine,it used to bend plate into cylinder shape, arc-shape in normal temperature. The up roller of the device can lift up and down, level left and right.Level move up roller to pre-bend the plate, let the up roller in asymmetrical location relative two bottom rollers.Up roller’s lift movement adopts hydraulic driven, and level move adopts mechanical driven.

W11S-10×3000 3 Roller Bending Machine vertical displacement of upper roller has a digital display, eye-catching and intuitive. This products Shang roll universal type volume Board Shang roll can upper and lower mobile, also can level mobile, Shang roll upper and lower mobile used to change plate bent curvature, before and after mobile used to change Shang roll axis line vertical face said location, achieved plate of end Department pre bent and meet various bent by needed of process requirements, so no plus pressure machine, additional equipment, can once Shang material, not needed turn on can completed plate ends Department of pre bent and the forming bent function, and for forming artifacts of correction.

High accurate end pre-bending: free set of straight edge length, roll pressure directly on pre-bent, able to complete accurate end pre-bending.

Superior product precision: roll on a drum-shaped, roll down the lower idler tie in regulation, consecutive bends, from thin to thick plates ideal voucher system within this broad range of products.

Technical Parameters

3 Roller Bending Machine
3 roller bending machine
Model Pressure on the Upper Roll Roll Capacity Diameter of Upper Roll Diameter of Lower Roll Central
Distance
Main Motor  (kw) Roll Cone Angle
End
(mm)
Central(mm)
W11S-10×1500 37 8 10 205 135 180 4 ≤30°
W11S-12×2000 65 10 12 250 145 200 5.5 ≤30°
W11S-16×2500 100 12 16 300 165 270 11 ≤30°
W11S-20×3000 160 16 20 375 200 330 18.5 ≤30°
W11S-25×2500 190 20 25 380 220 360 18.5 ≤30°
W11S-30×2500 230 25 30 410 235 380 22 ≤30°
W11S-35×3000 320 30 35 500 260 420 37 ≤30°
W11S-40×3500 430 35 40 550 275 460 45 ≤30°
W11S-45×2500 430 40 45 520 275 460 45 ≤30°
W11S-50×3500 540 45 50 630 340 610 55 ≤30°
W11S-55×3000 610 45 55 620 360 650 55 ≤30°
W11S-60×4000 760 50 60 780 380 700 75 ≤30°
W11S-65×3000 760 55 65 700 380 700 75 ≤30°
W11S-70×4000 1000 65 70 820 440 820 75 ≤30°
W11S-75×3500 1000 65 75 780 440 820 75 ≤30°
W11S-80×3000 1000 70 80 770 440 820 75 ≤30°
W11S-90×4000 1350 80 90 910 480 920 90 ≤30°
W11S-100×3000 1250 85 100 820 480 920 90 ≤30°
W11S-110×3500 1400 95 110 940 520 1000 110 ≤30°
W11S-120×3000 1600 100 120 900 520 1000 110 ≤30°
W11S-140×3000 2200 120 140 960 620 1200 75×2 ≤30°
3 Roller Bending Machine
3 roller bending machine

W11S-10×3000 3 Roller Bending Machine on this device for roller omnipotent steel plate rolling machine used for bending a certain thickness of the metal sheet at room temperature into a tube-shaped, curved or there is a taper of parts.

The works by Rotary bending deformation.

Upper roller can be moved up and down, and also move horizontally, so it does not need additional press and additional equipment to feed at a time, without having to turn to complete end pre-bending and bending of the plate features, as well as for correction of the workpiece. Using assistive devices can make the ends of sheets, and fewer remaining straight edge.

Is oil, chemical, cement, shipbuilding, boilers, air, water, power transmission towers and other necessary equipment for the machinery and equipment manufacturing industry.

plate roller
plate roller

Features

The straight edge length can be set freely and the upper roll is pre-bending.

W11S-10×3000 3 Roller Bending Machine features high precision end bending.

The W11S-10×3000 3 Roller Bending Machine works with good accuracy. It can bend continuously whether the plate is thin or thick.

Parameters are controlled by NC, which improves the productivity greatly. It is easy and convenient for operation.

The lower rolls of this plate rolling machine are fixed and the upper rolls move vertically and horizontally. This bending machine is much safer.

This W11S-10×3000 3 Roller Bending Machine owns friendly human-computer interface.

The working pressure of hydraulic system and cylinder, motor working condition and sensor displacement can be displayed on it.

three roll plate bending machine
3 roller bending machine

W11S-10×3000 3 Roller Bending Machine can also display hydraulic valve power loss condition, soft and hard limit hint, equipment overload alarm, oil temperature alarm and cooling tip.