6 daily maintenance requirements of 4 roll plate rolling machine

  • Jack Lu 

The four-roll plate rolling machine is an important piece of equipment in the production of the enterprise. You must carry out daily maintenance in the correct way during use, otherwise not only will the equipment be damaged and affect the production, but also unexpected consequences will occur.

Maintenance requirements

Correct use and reasonable maintenance can prolong the service life of the plate rolling machine and reduce the repair cost. The maintenance work of the four-roll plate rolling machine mainly includes the following points:

4 roll bending machine
4 roll bending machine
  1. The work must be carried out under normal operation and good lubrication, and the lubrication system must be strictly implemented.
  2. Develop a regular inspection and repair system.
  3. When all vulnerable parts are excessively worn or lose their original performance requirements, the parts should be replaced in time, and if the parts are damaged, they should be repaired in time.
  4. During use, pay attention to the temperature of each part. The temperature of the oil in the tank must not exceed 60°C.
  5. The hydraulic transmission system should be checked and cleaned regularly, and the failed hydraulic components should be adjusted and replaced in time. Maintain the specified oil level in the oil tank to minimize the pollution of hydraulic oil. Check the degree of deterioration of hydraulic oil for at least half a year. For example, all live parts of the electrical system should be properly grounded, and all electrical components should be regularly repaired, dusted, and damaged and failed components replaced in time.
  6. The workplace is not allowed to pile up materials casually, and the oxide skin should be cleaned in time.