Plate rolling machine is a kind of forging machine equipment that can bend non-metallic plates into cones, spheres, cylinders or other shapes.
CNC four-roll plate rolling machine is a machine used for bending and correcting metal plates, and is dedicated to the forming and bending of metal plates. The pre-bending and curling of various specifications of cylindrical and arc-shaped workpieces can be completed after one loading. With the help of auxiliary devices, conical cylinders can be rolled. Metal plates can also be roughly shaped.
The four-roll plate rolling machine can directly pre-bend the ends of the plate without the help of other equipment molds, and the remaining straight edges are small; compared with the asymmetric three-roll plate rolling machine, it can roll the workpiece without turning the plate. This not only improves efficiency and ensures the quality of the workpiece, but also has a simple process, easy operation, and reduces the labor intensity of workers.
Step-by-step operation guide of the four-roll plate rolling machine
Material preparation:
- Make sure the metal plate has the correct thickness and quality.
- Lubricate the rollers to minimize friction.
Loading material:
- Place the metal plate between the top roller and the bottom roller.
- Adjust the side rollers for proper alignment.
Set up parameters:
- Configure bending parameters such as angle, curvature, and speed.
- Perform a test run to verify the settings.
Start the plate rolling process:
- Start the machine gradually to prevent sudden stress on the metal.
- Monitor the process for any irregularities.
Conclusion
The four-roll plate rolling machine has high precision and versatility, and the efficient operation of this equipment requires a systematic approach.
By following the correct plate rolling process operating procedures and implementing routine maintenance in a timely manner, the efficiency and service life of the four-roll plate rolling machine can be improved.