Home >> Plate Roller >> Plate roller machine Operation Manual >> The Neutral Axis and Considerations for Bending Plate

When steel plate is bent, the inside surface of the bend is compressed and the outside surface of the bend is stretched. Somewhere in between lies the neutral axis which is a line in the steel that is neither compressed nor stretched. The tighter the radius the bigger the opposing forces become – bringing up the concept of minimal radius.

**Steel Plate Stress Distribution**

The location of this line is key to determining the blank or developed length for bent pieces. Blank or developed length is the amount of material required to make the desired bend. Usually, the neutral axis is slightly closer to the inside of the bend. For practical purposes, it located at half of the thickness for thickness values less than 0.08 inch with a minimal error.

**Neutral Axis for Bent Steel Plate**

Based on experience, the general equation to find the distance from the inside face to the neutral axis is as follows:

Equation for Neutral Axis of Bent Plate

To calculate the blank length of a bent piece, we first have to determine the position of the neutral axis. The developed length of the piece will be the developed length of its neutral axis – in the equation below, we are referring to AB.

**Blank Length Calculation of Bent Steel**

Another way to determine this blank length is using the following equation and tables.

**Steel Blank Length**

We can find K1 from following table :

**K1 Table**

And we can find K2 from the following table:

**K2 Table**

By calculating and taking into consideration the developed lengthy, a qualified metal bender roller can accurately bend plate to the desired final product.

s
Bonded polyester thread
Waxed polyester thread
Bonded nylon thread
Angle bending machine
plate roller
plate rolling machine
plate bending machine
supercritical co2 cbd extraction equipment
Bonded Nylon Thread
Bonded Polyester Thread
3 roller bending machine
angle roll machine
4 roller plate rolling machine
3 roller plate bending machine
4 roll plate roller
section bending machine
supercritical fluid extraction equipment
supercritical co2 extraction equipment
vibrating conveyor

copyright © Borisbang Industrial Technology (BIT) 2019