Skip to content
2 Roll Plate Bending Machine

2 Roll Bending Machine

2 roll bending machine
2 roll bending machine

W10
2 ROLL PLATE ROLLER

Two Roll Plate Rolling Machine: The sheet material can be processed and formed at one time, without obvious straight edges, and the winding circle has high precision. It is an efficient, high-precision, and highly automated plate rolling processing equipment. The disadvantage is that the rolled product is single, and it can only roll plates less than 6 mm, which is not suitable for rolling steel plates with good rigidity.

2 ROLLER PLATE ROLLING MACHINE
DESCRIPTION:

  • The upper roller of the Plate Roller acts on the piston for vertical lifting movement through the hydraulic oil in the hydraulic cylinder in the central symmetric position of the two lower rollers. The final gear of the main reducer drives the two lower roller gears to engage in a rotary motion to provide torque for the rolled plate. .
  • The flat plastic sheet of the Plate Roller passes through the three work rolls (two lower rolls and one upper roll) of the equipment, and the metal plate is continuously bent in multiple passes by the lower pressing of the upper roll and the rotating motion of the lower roll. , producing permanent plastic deformation, rolling into the desired cylinder, cone, or part of them.
2 Roll Plate Bending Machine
2 Roll Plate Bending Machine

W10
2 ROLLER PLATE ROLLING MACHINE PRODUCTION LINE

The hydraulic automatic 2 Roll Plate Roller Production Line is an automatic metal coil processing production equipment developed based on the 2 Roller Bending Machine.

It realizes automatic delamination of plates, automatic material feeding, automatic feeding, automatic material feeding and automatic feeding. Automatic production of materials, automatic coiling, automatic discharging and other processes.

2 roll bending machine
2 roll bending machine

W10 2 ROLL PLATE ROLLER
FEATURES

 High degree of automation can effectively guarantee product quality, improve production efficiency, reduce production costs, and reduce labor intensity.

It is widely used in the rapid mass production of thin-walled tubes, automobile oil drums, ventilation pipes, chimneys, filters, solar water heaters, automobile exhaust pipes, liquid storage (gas) tanks, etc.

2 Roll Plate Bending Machine
2 Roll Plate Bending Machine

2 roll VS 3 roll plate rolling machine

The 2-roll plate rolling machine is composed of two rolls, which is different from the 3-roll plate roller: the 3 rolls of the three-roll plate rolling machine are rigid rolls, which are made of metal. The two-roll plate rolling machine has only one rigid roller, and the other is a flexible roller, which is made of rubber. When working, the servo motor drives the flexible roller to press against the rigid roller, and the deformation of the flexible roller causes the material to be deformed into a qualified shape. Due to the use of flexible rollers, the two-roller plate roller does not wear any surface of the plate, which is very suitable for stainless steel materials.

2 Roll Plate Bending Machine

Type

Standard models are divided into four types: 1300mm type, 1000mm type, 700mm type, and 500mm type. This is the maximum effective machining length, and a 50mm length is reserved.
The effective processing length mainly depends on the length of the rubber roll, because it is set for the two-roller plate bending machine. If this does not meet the needs, it can also be customized.
The thickness of the outer cover of the rubber roller is up to 35mm, and it can be used after cutting during use. The high-quality polyurethane glue is selected, which is crystal clear and can be customized in terms of hardness according to different metal plate thicknesses.