Skip to content

Method and steps for rolling cones with plate rolling machine

Sheet Metal Cone Rolling Machine

Plate rolling machine is a common metal processing equipment used to roll metal sheets into products of different shapes such as cylindrical, arc-shaped or conical workpieces within a certain range.

Steps for rolling cones with plate rolling machine

Preparation

  1. Prepare the required metal sheets or rolled sheets and ensure that their quality and size meet the requirements.
  2. Check whether the various components of the plate rolling machine are intact to ensure that the equipment can operate normally.
  3. Set the parameters of the plate rolling machine according to the requirements of the cone. Including the spacing between the upper and lower rollers, rolling speed, rolling pressure, rolling diameter, roller spacing, angle, etc., to adapt to the width, thickness and other dimensions and shapes of the target cone.
Four-roller plate rolling machine

Operation steps

  1. Loading.Place the prepared metal plate at the loading port of the plate rolling machine and fix it. At the same time, ensure that the position of the plate is correct and adjust the position of the roller to ensure that the metal plate can pass smoothly.
  2. Start the plate rolling machine and start the rolling operation. According to the set parameters, by controlling the operation of the plate rolling machine, the plate is squeezed by the upper and lower rollers and gradually forms a cone shape.
  3. During the rolling process, the speed and tension of the control machine need to be adjusted in time to ensure the smooth feeding of the metal plate and the smooth rolling into a cone.
  4. According to the design size and shape of the cone, gradually adjust the spacing of the rollers to allow the metal plate to gradually roll into a cone.
  5. During the rolling process, check the deformation of the metal plate in time, pay attention to maintaining the flatness and thickness uniformity of the material, and ensure that the shape and size of the cone meet the requirements.
  6. When the metal plate is rolled to the target shape, stop the rolling operation, take out the rolled cone, and perform necessary shaping and modification.

Conclusion

The plate rolling machine is a mechanical equipment widely used in the field of metal processing. It bends flat materials into various shapes by rolling. Plate rolling machines are widely used in shipbuilding, boilers, aviation, construction, light industry and other industries. When operating the plate rolling machine, pay attention to safety measures