Skip to content

Top 3 Precautions during operation of plate rolling machine

Plate Rolling Machine

Plate bending machine is a general equipment for bending metal sheets into cylindrical, arc-shaped or other shaped workpieces. According to the principle of three points forming a circle, the relative position changes and rotational motion of the workpiece are used to cause continuous plastic deformation of the plate to obtain a workpiece of a predetermined shape. Almost all steel materials formed into cylindrical shapes are rolled using a plate rolling machine.

The plate rolling machine is a form of plate rolling equipment. It is suitable for bending and forming of metal sheets. It can roll round, arc-shaped and tapered workpieces within a certain range, and has the function of pre-bending the end of the plate, leaving the remaining straight edges. It is small, has high work efficiency, and can perform functions such as rough leveling of metal plates on the plate rolling machine.

Precautions during operation of plate rolling machine

  1. Before starting the plate rolling machine, check whether there are any abnormalities in all parts of the plate rolling machine. The main transmission part of the plate rolling machine should be equipped with a braking device. The brake should be normal and reliable.
  2. Check the transmission system: When the load is running, the transmission system should be stable and free of impact and abnormal noise. Ensure that the operating system of the working part is flexible, accurate and reliable.
  3. When the sheet material enters the roller, be careful to prevent your hands or objects from being entangled in the roller; after the sheet material is placed and during the startup of the machine tool, it is strictly forbidden to stand in the direction of the incoming and outgoing materials; hands are not allowed to approach the rotating parts when the equipment is running, and hands are not allowed to be placed on the roller. The rolled steel plate; no one is allowed to stand on the workpiece during operation.
  4. The easily accessible parts and components of the plate rolling machine must not have sharp corners, sharp edges, sharp edges, etc. that may cause personal injury to avoid puncture wounds. The plate rolling machine should ensure that the work roll balancing device is effective before it can tip down the tilting side bearing body and take out the rolled cylinder workpiece.
  5. Overload operation is strictly prohibited.
  6. It is strictly prohibited to wear gloves to operate the plate bending machine, and the cuffs and corners of the workers’ clothes should be tied tightly.
  7. Protective covers should be installed on rotating parts such as pulleys and gears.
  8. The plate rolling machine equipment should be reliably grounded, and the circuit should be well insulated, without aging or damage.
  9. When adjusting the rollers and sheets, the machine must be stopped.

Conclusion

In short, before starting the machine, carefully check whether the equipment is intact. During the operation of the plate rolling machine, if irregular noise, impact and other abnormal phenomena are found, it should be stopped immediately for inspection.

The plate rolling machine is used in CNC machine tools and other fields. It is a shaping machine tool that performs continuous point bending of plates. It has the function of rolling plates of different shapes such as O-shaped, U-shaped, and multi-section R. It is frequently used in various enterprises and factories and has Very high market demand.

Leave a Reply

Your email address will not be published. Required fields are marked *